Pivotal stores the most recent software versions in a CurrentVersions.txt file that Flashwizard opens and reads the current versions out of. However, it was failing to close the file, allowing it to be used by others until the application was closed.

It now closes the file as soon as it is finished reading from it.

The address mapping for the V4 XL200 controller changed to be consistent with the mapping required for the new V5 XL200 project. This required changes to the fdc mapping files. A new file was added specifically for v4 and v5 rather than sharing the file for v3.73 and above.

V4.76.00 and higher require this new FlashDocotor update.

Flash Doctor is a production tool, not an engineering tool. Production has no need to import or map DSP S-Record files into a released FMF file. This capability was disabled to prevent access and confusion.

Engineering is able to do the mapping using the IntelBin console application.

Preparations were made to begin supporting the new V5 XL200 projects. Testing has not been completed. The option is visible but not enabled until testing is complete and the projects are ready.

The code and the radio button selection for the XL200 Version 5 Application Type were added in a prior SCN (4519). There was an issue at the time with programming a V5 file. It was time critical to get another change completed and released so the button was disabled.

This SCN enables the button and also fixed the issue with Version 5 XL200 files. The issue was that the selection was not being used to properly set the Application Type. This has been resolved and Flash Doctor is now ready to be used on V5 XL200 Application Files.

The Hump and Brake, 'U', option was added to the XL200OL controller. This change adds that option to the Open Loop options configuration window and allows that option to be configured for Open Loop controllers.