Changes made for Pathfinder V5.

Added Gripper OK input which is used to detect if the BNR system controlling the grippers has failed or detects a gripper is no longer being detected.

Changes made for Pathfinder PC V5.

Error message 398 Minimum Oil Temperature to Start Pump will be displayed when the controller monitoring the temp sensor sees that the oil temp has dropped below either the minimum temperature or the minimum working temp during run. Will display trying to start the pump if under the minimum temp.

Changes made for Pathfinder PC V5.

An ASC cabinet does not have foldguard integrated into it like a Flex design. This means using an external foldguard box is needed, but that has basic firmware in it that makes the installer have to take out the fast speed valve when we want to force the clamp into slow. This is not possible with an ASC machine which uses VFD's instead.

The solution was to update the PCSS to the latest foldguard firmware and then add on to the existing ASCV2 configuration the needed I/O. This allows for the handshake logic and the force slow to work without having to mess with anything in the existing cabinet.

Changes made for Pathfinder PC V5.

Added a new 9mm geometry to be available in the existing JouanelPTS31 configuration for their base electric folding machine.

Changes made for Pathfinder V5 PC's.

New configuration for an 8 frame Jorns TwinPro in case closed loop parameters needed to be changed. As of right now based on the 5 frame parameters.

Changes made for Pathfinder V5 PC's.

Some gripper machine options needed to be optimized for these two configurations.

Changes made for Pathfinder V5 PC's.

New firmware versions are:

Rev F: 4.04.19

Rev G: 5.00.18