When a Setup Configuration gets loaded into setups, the changes to setups should bet backed up to Eclipse. However when the configurations got loaded, the Backup bit for Setups that Eclipse relies on was not getting set. This has been resolved.

Edits to Setup Parameters that are part of Setup Configurations can now automatically be saved into the currently selected configuration.

A new Setup has been added for Backwards compatibility. The new setup is called "Save Setup Edits to Configuration". It defaults to No, which results in no changes to the controller operation. If the user determines that they would like their edits to configuration parameters to be saved in the configuration they can set it to Yes.

When set to Yes, the values of the configuration parameters will be saved in the current configuration just before loading a new configuration.

The new setup can be found in the "Operator Preferences" setup group.

There is a Damper Gag that is supposed to fire a damper hole on the part. It is only supposed to be enabled with P1 or P2 set to pattern 10. However, there was a bug that caused it to also be fired with pattern 9. This has been resolved.

The upper limit of the P1 and P2 fields have been increased to 19. All patterns above 9 get the Damper hole. Patterns 11 - 19 get the Damper hole and ConduLock holes. The ConduLock Patterns for 11 - 19 are identical to the Patterns for 1 - 9 respectively. Pattern 10 still only gets the Damper hole.

On some or all patterns it may not be physically possible for the Damper and ConduLock holes to physically both be installed and a Damper to function without hitting one of the conduit bars. The request for this feature was made and it is up to the customer to decide how they want to deal with conflicts and what patterns will work for their application.