The conditions for testing for Done Items and Orders have been simplified.

Done Items and Done orders will now be checked for deletion at a minimum of once per minute or a maximum of once every 10 minutes. This time is dependent on the Auto Delete Done Orders time. The programmed time is used for the timer but is capped at the specified min and max limits above.

Done items and orders are also checked on a Power Cycle or every Memory Test.

On a normal coil tailout, while running, the current item that is reported is still the actual item that was running during the tailout. The item, order and material code have been validated against the coil and it makes sense to report the coil information and the item information all togther in one production record.

When an order it completed and there is no more production for a coil, the current item is no longer the last item that was running against that coil. It may be some item or order that will never be run with that coil. This resulted in some confusing conditions. It is especially confusing if there is scrap that gets reported because the Threadout process doesn't perfectly count the material down to the Shear to Encoder distance before the coil tails out.

To counter act this, we are now keeping track of the last produced item. It gets initialized during initialize queue and during every decrement part as parts are being produced. This item is used instead of the current item when a Threadout (Tailout) occurs, while the line is halted.