Neither Baud Rate setting in a 6370 should ever be modified by a tech or a customer.

Techs and customers try to set the RS232 baud rate in the 6370 to match the baud rate the printer has configured. However, the XL controls both baud rates, RS232 and RS485, in the 6370. Each Print driver in the XL requires a specific RS232 setting that the XL will configure the 6370 for. That is the setting the printer MUST use.

If the settings in the 6370 are changed to match what is in the printer rather than using the setting the XL configures, the printer may work for a while. Eventually, after a power cycle or driver selection, the XL will change it back to the setting the printer is supposed to be configured for and printer communication will cease.

Two new Read Only setups have been added to display the required RS232 printer baud rate. The new setups are called Bundle RS232 Baud Rate (Read Only) and Part RS232 Baud Rate (Read Only). The printer must be configured to use the displayed setting.

As the names imply the settings are Read Only.