SCN 4635 allowed the Open Loop presses on an XL244CL to be configured for Feed to Stop operation.

This change had an unforeseen impact in that it was the first time the Shear on a Closed Loop controller was able to be configured as an Open Loop Feed to Stop.

There are many places in the code that test the type of shear press to determine if the controller is a Closed Loop Feeder or a Closed Loop Die Accelerator. This test is no a longer valid test in a lot of instances on a Closed Loop controller now.

Every place this test is used has had to be re-evaluated. There are so many places that require edits that all of edits are not practically able to be tested.

A combination of heavy code review and some spot testing is being used to verify these changes.