4675
XL2; Disable Manual Shear in Run Mode when in Hole Correction Mode
XL200
In Hole Correction mode the shear targets must stay in sync with the holes on the material and the Hole Queue. These requirements are incompatible with a Manual Shear in the Run Mode.
| Model | Version | Released |
|---|---|---|
| XL2OL | 5.86.00 | 8/9/2022 |
| XL2CL | 5.86.00 | 8/9/2022 |
| XL2OL | 4.86.00 | 8/9/2022 |
| XL2CL | 4.86.00 | 8/9/2022 |