Changes made for Pathfinder PC's.

ASC is an OEM that we deal with that makes roll formers and folding machines. They updated their current design to use an Ethernet/IP controlled backgauge besides a analog controlled servo. To handle this they needed a new machine model they could use in Pathfinder. The solution was to create an ASCV4 configuration that knows to use the Ethernet/IP protocol.

Changes made for Pathfinder PC's.

Changes made for Pathfinder V5.

With the creation of the rev G 5226 boards a lot of testing had to go into making sure Pathfinder could program the board. Since the firmware is version controlled between the board and Pathfinder the easiest way to force the update process was to change in the file. Through all this testing the wrong version number accidentally got checked in and put into a release. This causes Pathfinder to try to update the controller every start up because of the mismatch. The solution was to make sure the correct version number is embedded into the file.