4678
XL2OL; Two Speed Operation Broken by SCN 4665
XL200
SCN 4665 broke Two Speed Feed to stop operattion on the XL2OL.
Two issues were found.
- In Run, the controller failed to shift into slow speed.
- When halting the line in Run, the Motion Outputs flickered ON and OFF until the controller Run output turned off.
Both issues have been resolved.
The cause of Issue 1 also impacted the source code on the Closed Loop controllers but does not cause similar issues due to the differences between Open and Closed Loop operation.
| Model | Version | Released |
|---|---|---|
| XL2OL | 5.86.01 | 8/26/2022 |
| XL2CL | 5.86.01 | 8/26/2022 |
| XL220OL | 5.86.01 | 8/26/2022 |
| XL220CL | 5.86.01 | 8/26/2022 |
| XL2OL | 4.86.01 | 8/26/2022 |
| XL2CL | 4.86.01 | 8/26/2022 |
| XL220OL | 4.86.01 | 8/26/2022 |
| XL220CL | 4.86.01 | 8/26/2022 |